Anti-slip pool flooring outdoors needs Class 3 (Rd > 45 under UNE-ENV 12633) across every barefoot, wet-tread zone, which corresponds to an R11 ramp finish. That is the level building codes require for the perimeter, the coping and the shallow parts of the basin. Inside the basin, the reference material is glass mosaic such as Ezarri; on the deck and coping, technical porcelain from Inalco MDi or Keope in 20 mm thickness. This guide shows you how to read the slip rating, where each class applies, and what actually withstands chlorine, salts and frost.<\/p>
A pool edge stacks up the three worst conditions for slipping: standing water, bare feet and a surface that often tilts toward the basin. Building regulations rank these zones as Class 3, the highest tier \u2014 slip resistance Rd above 45, measured with the friction pendulum under UNE-ENV 12633. In the trade that level is labelled R11 (DIN 51130 ramp test). Rd (pendulum) and R (ramp) are separate tests measuring the same property. R11 is the sensible minimum for coping, steps and entry; on steep falls, step up to R12.<\/p>
Two environments, two materials. The deck and coping face splashing water, direct sun and barefoot traffic \u2014 large-format, 20 mm anti-slip porcelain. The basin sits permanently submerged and in constant contact with treatment chemicals \u2014 a watertight, chemically inert glass mosaic that bends around curves and steps. On the deck and shallow areas under 1.50 m (where a person stands), Class 3 is required; the deep submerged zone needs watertightness rather than grip. See our pools<\/a> page.<\/p> Because glass neither absorbs water nor reacts with chlorine. Ezarri glass mosaic has near-zero absorption, shrugs off salts, chlorine and pH swings without fading, and its tessera format clads coves, steps and overflow channels without forced cuts. For stand-up areas \u2014 steps, interior beach, shallow floors \u2014 Ezarri offers dedicated anti-slip series reaching Class 3 without giving up the glass finish. Browse Ezarri<\/a>.<\/p> No. You need technical, rectified porcelain in 20 mm with a declared anti-slip finish. That 20 mm slab carries more than four times the breaking strength of a conventional 8\u201310 mm tile \u2014 laid on pedestals, over gravel or glued down, taking point loads without cracking. Inalco MDi or Keope in 20 mm deliver water absorption \u2264 0.5%, frost and thermal-shock resistance, UV colour stability, and R11 surfaces cleared for the wet bare foot, resisting chlorine and salts. Find them at Inalco MDi<\/a> and Keope<\/a>, within porcelain flooring<\/a>.<\/p> Two systems run in parallel. The building-code system (UNE-ENV 12633) sorts floors into Classes 0\u20133 by the pendulum Rd value; an outdoor pool needs Class 3 (Rd > 45). The German ramp system uses R for shod testing (DIN 51130: R9\u2013R13) and classes A\/B\/C for the wet bare foot (DIN 51097). A good pool porcelain declares Class 3, R11 and barefoot class C at once.<\/p>Why is Ezarri mosaic the standard for the basin?<\/h2>
Will any porcelain do for the coping and deck?<\/h2>
How do you read the slip classification?<\/h2>
| R class (DIN 51130, shod)<\/th> | Pendulum Rd (UNE-ENV 12633)<\/th> | Building-code class<\/th> | Barefoot (DIN 51097)<\/th> | Recommended use<\/th><\/tr><\/thead> |
|---|---|---|---|---|
| R9<\/td> | 15\u201335<\/td> | Class 1<\/td> | \u2014<\/td> | Dry interior: living room, bedroom<\/td><\/tr> |
| R10<\/td> | 35\u201345<\/td> | Class 2<\/td> | A (\u226512\u00b0)<\/td> | Bathroom, kitchen, covered wet areas<\/td><\/tr> |
| R11<\/td> | > 45<\/td> | Class 3<\/td> | B (\u226518\u00b0)<\/td> | Shower, pool coping and deck (outdoor)<\/td><\/tr> |
| R12<\/td> | > 45<\/td> | Class 3<\/td> | C (\u226524\u00b0)<\/td> | Ramps, slopes, access showers<\/td><\/tr><\/tbody><\/table>Conclusion<\/h2>Anti-slip pool flooring done properly isn’t one decision but two: Class 3 \/ R11 across everything walked on wet and barefoot \u2014 coping, deck and stand-up areas of the basin \u2014 plus a watertight glass mosaic like Ezarri for the rest of the pool. At Gomila we stock both families and help you read each technical sheet so the declared class matches what your Mallorca project actually requires.<\/p> Frequently asked questions<\/h3> |